In the process of using electrofusion fittings connection should pay attention to what is the

Electrofusion wire pipe is connected to the steel wire mesh skeleton plastic composite pipe bridge, it plays a non-substituting role in the whole pipe. Similarly, Jinhua PE water supply pipe fittings the quality of its connection is related to whether the production line as a whole meets the benchmark. For your convenience, we summarise and refer to some of the connection precautions of the electric fuse fittings. When connecting, can the construction be done at a lower or closest outdoor temperature?

Plastic pipe has thermal expansion characteristics, the temperature of the day when also the state of the pipe, where it is easy to connect the electrofusion pipe? Shaoxing PE water supply pipe fittings second, when the electrofusion wire pipe body connection, electrofusion wire pipe body and its corresponding connection parts of the socket, sealing and other parts are clean, shall not be attached to the soil, water and other debris. Quality.

If there is dirt on it, it must be wiped clean with a wet towel and connected without affecting the quality of welding. Thirdly, when it is necessary to connect with electrofusion flange, Jiaxing PE water supply pipe fittings it is necessary to produce metal products such as steel flange plate and bolts. All must be in accordance with the national standards corresponding to the soil quality of the site for anti-corrosion treatment, to avoid its rust, affecting the quality of use.

Fourth, the electrofusion wire pipe connection, the observation hole of the pipe joint will be placed in the pipe body directly above or on the side, should also pay attention to the welding convenience, Fifth, the connection of the electrofusion wire pipe body, all must be on both sides of the depiction of the marking line, in the subsequent connection process, the pipe fittings fall off, offset, to prevent the welding of whether there is the presence of the electrofusion wire pipe body.