What do I need to pay attention to when installing PE co-laminated siphon fittings?

PE same layer siphon fittings is a high-tech material made of pipe connectors, the material has a high pressure resistance and corrosion resistance, widely used in industrial production and civil construction and other fields. When using PE siphon fittings, in order to avoid leakage, clogging and other problems, you need to pay attention to the following aspects.

First of all, before installation, you need to check the PE same layer siphon fittings, check whether there is corrosion, breakage and other problems, if there is then you need to replace it in time, to avoid affecting the normal use of the pipeline, at the same time, you need to confirm that the pipeline model, specifications, pressure and other parameters during the inspection process whether to meet the requirements.

Secondly, the connection method of PE homogeneous siphon fittings should comply with the relevant regulations, generally using rubber sealing ring connection or thermal fusion connection of imported electrofusion fittings, need to be checked before installation, to ensure that the sealing ring is free of damage, no debris in the connection area, oil, etc., and the use of the correct tools for connection.

Third, the installation location of PE homogeneous siphon pipe fittings need to be reasonably selected, generally select the curved bullet electrofusion pipe fittings in the ventilation, dry, light, geometric position must meet the needs of the region; if you need to be installed underground, you need to choose a good corrosion-resistant performance of the pipeline, and to take the corresponding sound insulation, moisture-proof measures, to avoid the aging of the pipeline due to soil humidity and deformation.

Fourth, the installation needs to be based on the need to develop a construction plan, and select the appropriate electrofusion pipe fitting mould tools and operators, to ensure that the construction is carried out in accordance with the requirements to avoid quality problems caused by improper construction operations, such as deformation of the pipeline, breakage and so on.

Finally, after the completion of the installation needs to be carried out pressure test, water tightness test, etc., to ensure that the pipe connection without leakage phenomenon, and at the same time need to develop relevant maintenance measures, regular inspection and maintenance, to avoid pipeline aging, corrosion and other problems, to ensure the normal service life of the pipeline.

In short, the installation of PE siphon pipe fittings need to pay attention to the following points, first of all, we must check the connection, select the appropriate connection method, and carry out the correct installation, and secondly, we need to reasonably select the installation location, develop a construction programme and pressure test and water tightness test, and finally need to establish a maintenance system for regular inspection and maintenance, to ensure that the pipeline's long term good use of the effect.